YC series permanent magnets are suitable for shipyards, riveting and welding factories, structural parts factories, warehouses, workshops, freight yards, etc. It is used together with various lifting equipment to absorb and lift all magnetic materials or workpieces, and it can be used to transport magnetic steel plates , cast ingots, and shaped steel can be used to transport scrap steel and scrap iron, which can be used alone or multiple units can be used to lift large and long magnetically conductive workpieces.

YC series permanent magnets operating environment:
1. The environment and the temperature of the sucked steel plate are in the range of -20°C-100°C.
2. There is no gas and dust that corrodes metal in the environment.
3. The permanent magnet hanger can be used indoors and outdoors, but anti-rust treatment should be done after working in rainwater.
4. The YC1 and YC2 magnetic spreaders cannot unload in the air, and the YC3 lifting permanent magnets should pay special attention to safety when unloading in the air.
The working principle of YC series permanent magnets: The permanent magnet of the magnetic circuit of the unit is driven by the handle to rotate in the magnet. When the permanent magnet rotates to a fixed position, the magnetic field circulates internally, and there is no magnetic field externally. At this time, lift the permanent magnet to unload. When the permanent magnet rotates to another fixed position, the magnetic field is turned on and the magnetism appears to the outside. At this time, lift the permanent magnet to absorb the material.