SV series NdFeB magnetizing and demagnetizing machine
 |
||||||||||||||||||||||||||||||
|
1. Purpose SV series magnetizing and demagnetizing machine is a special equipment for both magnetizing and demagnetizing for neodymium iron boron magnetic steel workpieces. Magnetizing magnetic field is better than 2.0T 2. Working principle SV-type magnetizing and demagnetizing machine is powered by AC power supply. After rectification, it generates a DC current and transmits it to the electromagnet to generate a magnetic field. Magnetizing: Put the workpiece into the center of the electromagnet's magnetic field, and apply a direct current to generate a high-strength magnetic field in the center of the electromagnet's magnetic field to saturate the magnetization of the magnet. Stop the power supply and take out the workpiece to achieve the purpose of magnetization. Demagnetization: Put the magnetic steel into the center of the electromagnet's magnetic field, the direction is opposite to that during magnetization, then the current is applied, and the strength of the demagnetization field is determined according to the coercivity of the magnetic steel, and the corresponding current is applied to the workpiece. For demagnetization, the closer the applied magnetic field is to the coercivity of the workpiece, the better the demagnetization effect. 3. Product description 1. Electromagnet part: Using SBV series double yoke single tuning adjustable air gap electromagnet Electromagnet introduction: its pole is placed vertically on the ground, the lower pole is fixed, the upper pole can be adjusted to change the air gap, the direction of the magnetic field is perpendicular to the ground, the magnetization method can be axial magnetization or radial magnetization or radiation Magnetizing. Main features: easy to take and place samples, suitable for repeated magnetization, and widely used in the production and measurement of magnetic materials.
2. Power supply part: The output voltage is adjustable, the output current is adjustable, the current and voltage are digitally displayed, the magnetizing time is set, the magnetizing period is 1~10 seconds, the magnetizing direction and the demagnetizing direction are set, and the switch is triggered by one button.
|
||||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||
|
在线留言
WRITE A MESSAGE TO US
Changchun Yingpu magneto-electric Technology Development Co., LTD
Company address: No.183, Yingxiang East Street, Erdao District, Changchun city, Jilin Province
Skype：yangshuang1110
Email : ypsales@ccypcd.com / carmen@ccypcd.com
Changchun Yingpu Magneto-electric Technology Development Co., LTD. All rights reserved JI ICP 05001052 by：300.cn