|
Special-shaped electromagnets: Our company can design and manufacture various special-shaped electromagnets according to user requirements. It can be designed and manufactured according to different usage methods, different experimental requirements, different working environments, and supporting assembly with different equipment; the electromagnet can achieve maximum deformation while maintaining the highest possible magnetic field.
|
| Serial number |
model |
The main technical parameters |
Product Image |
|
1
|
Special-shaped magnet |
main indicators:
1. Structure: The three coils of the electromagnet have the same magnetic field axially. The middle coil is hollow and fixed on the track. The coils on both sides can move along the track to facilitate the placement of samples. When the three coils are close, the magnetic circuit is close to closed. , The magnetic field has a diameter of 200mm, a length of 200mm, and the direction of the magnetic field is parallel to the ground. To
2. The highest magnetic field H≥0.1T.
3. Power 1200W
|
|
|
2
|
E60 |
Main indicators: 1. Structure: Electromagnet single-line package and double yoke stand upright, the direction of the magnetic field is horizontal, the side pole of the wireless package has a through hole, and the diameter is 5mm. The upper yoke irons the microscope lens hole, the aperture is 30mm; 2. The magnetic field air gap is 30mm, and the highest magnetic field H≥0.45T. 3. Power 1000W |
|
|
3
|
EQS175
|
main indicators:
1. The structure of the electromagnet adopts a two-wire wrap-around magnetic circuit, with a fixed air gap, and the magnetic field is in the horizontal direction. The electromagnet is placed on the floor car and can move back and forth on the track.
2. As shown in the figure, the distance between the top of the magnetic pole and the top of the wire package is about 140mm, the magnetic pole area is about 80*80mm2, and the fixed air gap is not less than 65mm. The size of the magnetic pole and the wire package ensure that the incident light and reflected light are 90° in the magnetic field. Through.
3. Use the matched power supply under an air gap of ≥65mm. At the maximum power, the magnetic field is ≥0.5T, and the magnetic field in the center of the air gap has a uniform area of more than 20*20mm2.
4. Power supply 5KW
|
|
|
4
|
E80
|
main indicators:
1. Structure: The electromagnet single-line package and double yoke are placed vertically, the magnetic field direction is vertical, the side pole of the wireless package has a lens hole, the aperture is 40mm, and the pole surface aperture is 10mm. The lower pole is adjustable;
2. The magnetic field air gap is 10mm, and the highest magnetic field H≥1.0T.
3. Power 1000W
|
|
|
5
|
SB130T
|
main indicators:
1. Structure: Kerr magneto-optical effect electromagnet, double yoke is placed vertically, the direction of the magnetic field is horizontal, and the air gap is adjustable. The wire wrap winding is made into a tower shape to ensure that the angle between the incident light and the reflected light is greater than or equal to 90 degrees;
2. The magnetic field air gap is 10mm, and the highest magnetic field H≥2.5T. When the air gap is 30mm, the magnetic field H≥1.4T.
3. Power supply 4500W
|
|
|
