Address: 183 YINGXIANG EAST STREET, ERDAO DISTRICT, CHANGCHUN, CHINA
Contact:+86-431-85562503 / 17643118999
Fax:0431-85235752
E-mail:ypsales@ccypcd.com / yptech@ccypcd.com
ALL RIGHTS RESERVED CHANGCHUN YINGPU MAGNETOELECTRIC TECHNOLOGY DEVELOPMENT CO. LTD JI ICP 05001052 NUMBER WEBSITE CONSTRUCTION: CHANGCHUN ENTERPRISE POWER
Frame type demagnetizer
Product introduction:
Frame demagnetizer is widely used in various tools, molds, bearings and other copper and iron workpieces and small multi-piece workpieces. After power-on, please pass the workpiece through the frame demagnetizer to achieve good demagnetization effect. It is suitable for planning automatic process, working with non-magnetic magnet conveyor belt to improve productivity, long-term work and simple and convenient operation.
When the frame demagnetizer is powered on and starts working, please pass the workpiece from the demagnetizer (and stay for 3-5 seconds) and leave the frame mouth for a distance of about 1.5 meters to achieve a good demagnetizer effect. If the number of workpieces is large, the workpiece can be placed in a container (such as plastic frame, wooden frame, paper frame, etc., non-magnetic material), pass once (and stay for 3-5 seconds), and the workpiece can be demagnetized. Do not disconnect the power from the workpiece without leaving the frame, as it may cause the demagnetization to be uncleaned and magnetized. The shape of the frame demagnetizer can be square or round according to the shape of the workpiece.
Specification & Parameter
|