YP Series DC Power Supply
The DC power supply is a bipolar constant current power supply with high stability, high accuracy, high linearity and low ripple noise;
Relay-reversal direction controlled by the microprocessor with 5 options to delay time;
Reversal current surge: Less than 1 mA;
Three linear sweep modes including I, I-III, I-III-I quadrants;
Provided with built-in RS-232 or USB port and the relative conversion port;
A set of computer interface command (for RS-232 or USB port);
Timing continuous trigger output during sweeping.
YP Series DC Power Supply Attributes
Parameters of the YP Series DC Power Supply
|
Quasi-bipolar Power Supply |
|||||||||||||
|
Model No. |
Output Current Range |
Current Resolution |
Accuracy |
Linearity |
Stability |
Noise |
Temperature Coefficient |
Output impedance |
Output Power |
Load Range |
Function |
Thermal methods |
Notes
|
|
YP001-105 |
±105mA/105V |
1µA（1/105,000 F.S.） |
0.015% |
0.005% |
10ppm/h |
<4µA RMS |
3ppm/°C |
500MΩ DC |
10W |
RS-232C/USB/Trigger output synchronization
|
Force-air Cooling
|
Clamp Voltage：0—105.0V Clamp Voltage Resolution：0.1V
|
|
|
YP005-42 |
±1200mA/42V |
10µA（1/120,000 F.S.） |
0.015% |
0.005% |
10ppm/h |
20µA RMS |
3ppm/°C |
100MΩ DC |
50W |
RS-232C/USB/Trigger output synchronization
|
Force-air Cooling
|
||
|
YP10-100 |
±10A/100V |
0.1mA（1/100,000 F.S.） |
0.1% |
0.01% |
100ppm/h |
2mA RMS |
<20ppm/°C |
300kΩ DC |
1kW |
3—10Ω |
RS-232C/USB/Trigger output synchronization
|
Force-air Cooling
|
|
|
YP03-60 |
±5A/60V |
0.05mA（1/100,000 F.S.） |
0.1% |
0.01% |
30ppm/h |
1mA RMS |
<5ppm/°C |
>2.5MΩ DC |
300W |
1—12Ω |
RS-232C/USB/Trigger output synchronization
|
Force-air Cooling
|
|
|
YP17-170 |
±10A/170V |
0.1mA（1/100,000 F.S.） |
0.1% |
0.01% |
100ppm/h |
2mA RMS |
<20ppm/°C |
300kΩ DC |
1.7kW |
5—17Ω |
RS-232C/USB/Trigger output synchronization
|
Force-air Cooling
|
|
|
YP80-120 |
±65A/120V |
0.1mA (1/65,000 F.S.) |
0.2% |
0.01% |
100ppm/h |
12mA RMS |
<30ppm/°C |
>500kΩ DC |
7.8kW |
1.25—2Ω（60A） |
RS-232C/USB/Trigger output synchronization
|
water-cooling |
|
|
YP40-120 |
±33A/120V |
0.1mA（1/330,000 F.S.） |
0.1% |
0.01% |
100ppm/h |
<6mARMS |
<30ppm/°C |
>500kΩ DC |
3.96kW |
2.5—4Ω（30A） |
RS-232C/USB/Trigger output synchronization |
Force-air Cooling |
|
|
True Bipolar Power Supply |
|||||||||||||||
|
Model No. |
Output Current Range
|
Current Resolution |
Accuracy |
Linearity |
Stability |
Noise |
Temperature Coefficient |
Output Impedance
|
Output Power
|
Load Range
|
Load Protection |
Function |
Thermal methods |
Output |
Response Rate |
|
YP005-21 |
±2500mA/21V |
10µA（1/250,000 F.S.） |
0.015% |
0.005% |
10ppm/h |
<50µA RMS |
3ppm/°C |
>100MΩ DC |
>50W |
RS-232C/USB/Triggeroutput synchronization |
Force-air Cooling |
Push–pull Output,True Bipolar,Four-quadrant Operation |
<100µs（Resistance loads） |
||
|
YP6-60 |
±10A/60V |
0.01mA（1/1,000,000 F.S.） |
0.02% |
0.005% |
100ppm/h |
2mA RMS |
10ppm/°C |
1MΩ DC |
600W |
0—6Ω |
Linear gradient setting for processing abrupt current |
Automatic sweep/trigger/Input and Setting/ RAM/RS-232C/USB/Trigger output synchronization |
Force-air Cooling |
Push–pull Output,True Bipolar,Four-quadrant Operation |
<100µs（Resistance loads） |
Quasi-bipolar Power Supply | |||||||||||||
Model No. | Output Current Range | Current Resolution | Accuracy | Linearity | Stability | Noise | Temperature Coefficient | Output impedance | Output Power | Load Range | Function | Thermal methods | Notes |
YP001-105 | ±105mA/105V | 1µA（1/105,000 F.S.） | 0.015% | 0.005% | 10ppm/h | <4µA RMS | 3ppm/°C | 500MΩ DC | 10W | RS-232C/USB/Trigger output synchronization | Force-air Cooling | Clamp Voltage：0—105.0V Clamp Voltage Resolution：0.1V | |
YP005-42 | ±1200mA/42V | 10µA（1/120,000 F.S.） | 0.015% | 0.005% | 10ppm/h | 20µA RMS | 3ppm/°C | 100MΩ DC | 50W | RS-232C/USB/Trigger output synchronization | Force-air Cooling | ||
YP10-100 | ±10A/100V | 0.1mA（1/100,000 F.S.） | 0.1% | 0.01% | 100ppm/h | 2mA RMS | <20ppm/°C | 300kΩ DC | 1kW | 3—10Ω | RS-232C/USB/Trigger output synchronization | Force-air Cooling | |
YP03-60 | ±5A/60V | 0.05mA（1/100,000 F.S.） | 0.1% | 0.01% | 30ppm/h | 1mA RMS | <5ppm/°C | >2.5MΩ DC | 300W | 1—12Ω | RS-232C/USB/Trigger output synchronization | Force-air Cooling | |
YP17-170 | ±10A/170V | 0.1mA（1/100,000 F.S.） | 0.1% | 0.01% | 100ppm/h | 2mA RMS | <20ppm/°C | 300kΩ DC | 1.7kW | 5—17Ω | RS-232C/USB/Trigger output synchronization | Force-air Cooling | |
YP80-120 | ±65A/120V | 0.1mA (1/65,000 F.S.) | 0.2% | 0.01% | 100ppm/h | 12mA RMS | <30ppm/°C | >500kΩ DC | 7.8kW | 1.25—2Ω（60A） | RS-232C/USB/Trigger output synchronization | water-cooling | |
YP40-120 | ±33A/120V | 0.1mA（1/330,000 F.S.） | 0.1% | 0.01% | 100ppm/h | <6mARMS | <30ppm/°C | >500kΩ DC | 3.96kW | 2.5—4Ω（30A） | RS-232C/USB/Trigger output synchronization | Force-air Cooling | |
True Bipolar Power Supply | |||||||||||||||
Model No. | Output Current Range | Current Resolution | Accuracy | Linearity | Stability | Noise | Temperature Coefficient | Output Impedance | Output Power | Load Range | Load Protection | Function | Thermal methods | Output | Response Rate |
YP005-21 | ±2500mA/21V | 10µA（1/250,000 F.S.） | 0.015% | 0.005% | 10ppm/h | <50µA RMS | 3ppm/°C | >100MΩ DC | >50W | RS-232C/USB/Triggeroutput synchronization | Force-air Cooling | Push–pull Output,True Bipolar,Four-quadrant Operation | <100µs（Resistance loads） | ||
YP6-60 | ±10A/60V | 0.01mA（1/1,000,000 F.S.） | 0.02% | 0.005% | 100ppm/h | 2mA RMS | 10ppm/°C | 1MΩ DC | 600W | 0—6Ω | Linear gradient setting for processing abrupt current | Automatic sweep/trigger/Input and Setting/ RAM/RS-232C/USB/Trigger output synchronization | Force-air Cooling | Push–pull Output,True Bipolar,Four-quadrant Operation | <100µs（Resistance loads） |
We take your privacy very seriously and when you visit our website, please agree to all cookies used.
